EPR supply data must do more than provide a final reporting total. Producers may also be required to demonstrate how that total was calculated through verification, attestation, inspection or audit. 

For organizations with large product catalogues, complex sales structures or operations across several provinces, demonstrating how reported totals were calculated can be challenging. Relevant information is often spread across different business systems and records, and inconsistencies between these sources can make the final report difficult to substantiate. 

In our previous blog exploring EPR programs in Canada, we looked at how registration, reporting requirements, material scope and exemption thresholds differ across the country. Verification is another important part of this evolving compliance landscape. This article focuses on current EPR verification requirements in Ontario and Alberta, including which producers may be affected, what the process can involve and what organizations should have in place to comply. 

What Is EPR Verification?

EPR verification is a formal review of the data, calculations, methodology, and supporting records used to prepare a producer’s supply report. Although requirements vary by jurisdiction and EPR program, the process generally assesses whether the reported quantities are accurate, complete and supported by a documented approved methodology. 

Verification is related to, but different from other EPR reporting requirements: 

  • Supply reporting records the amount of regulated material a producer supplied into a jurisdiction during a specified reporting period. 
  • Supply data verification reviews the information and methodology used to calculate that reported amount. 
  • Performance auditing examines reported collection, management, reuse, recycling or resource-recovery results. 

Depending on the applicable program, a producer may be subject to one or more of these requirements.

Which Ontario Producers Require Verification?

Ontario does not have a single verification rule that applies uniformly across every EPR program. Requirements vary based on the regulated material, producer size, and reporting year. Below, we outline which producers are currently required to submit supply data verification reports under Ontario’s EPR programs. 

Blue Box Producers 

Ontario Blue Box producers are not required to submit supply data verification reports with their annual reports in 2026. However, producers remain responsible for the accuracy and completeness of the information they report. 

Key points include: 

  • First verification report: Required in 2027 and covering 2026 supply data. 
  • Verification during the deferral: RPRA will use a risk-based internal process to verify supply reports submitted in 2025 and 2026. 
  • Record retention: Producers must retain relevant records for five years from the date they were created. 
  • Supporting documentation: Records should show how reported Blue Box weights were calculated and include the information supporting those calculations. 
  • Inspections: RPRA may inspect producers and request records to verify the accuracy and completeness of submitted data. 

Blue Box producers can use the period before the first verification report is due to establish a traceable reporting process for 2026 supply data, rather than attempting to reconstruct the necessary records later. 

Information Technology, Telecommunications and Audio-Visual Equipment Producers

Large ITT/AV producers must submit annual supply data verification reports in accordance with Ontario’s Electrical and Electronic Equipment Verification and Audit Procedure. 

Key points include: 

  • Verification threshold: A large ITT/AV producer has an average annual supply of at least 275,000 kilograms, calculated over a rolling three-year period. 
  • Large producers: Must submit an annual supply data verification report. 
  • Small producers: Are not required to submit a verification report but remain subject to inspection. 
  • Producer classification: The large and small producer definitions used for verification differ from those used elsewhere in the Electrical and Electronic Equipment Regulation. 

Producers should therefore assess their status using the threshold established specifically for supply data verification rather than relying on classifications used for other EPR obligations. 

Tire Producers

Large tire producers must submit an annual supply data verification report under Ontario’s Tires Verification and Audit Procedure. 

Key points include: 

  • Verification threshold: A large tire producer has an average annual supply of at least 500,000 kilograms, calculated over a rolling three-year period. 
  • Large producers: Must submit an annual supply data verification report. 
  • Small producers: Are not required to submit a verification report but remain subject to inspection. 
  • Producer classification: The large and small producer definitions used for verification differ from those used elsewhere in the Tires Regulation. 

Producers should therefore determine their status using the threshold established specifically for supply data verification rather than relying on classifications used for other requirements. 

Battery Producers

Large battery producers must submit supply data verification reports under Ontario’s Batteries Verification and Audit Procedure. Separate thresholds apply to rechargeable and single-use batteries. 

Key points include: 

  • Rechargeable battery threshold: A large producer has a three-year rolling average supply of at least 12,000 kilograms of rechargeable batteries. 
  • Single-use battery threshold: A large producer has a three-year rolling average supply of at least 100,000 kilograms of single-use batteries. 
  • Newly registered producers: Producers that registered after 2022 must submit a verification report for their first full calendar year of battery supply. 
  • Partial-year obligations: A producer that becomes obligated partway through a calendar year is not required to complete verification for that partial year. 
  • Small producers: Those that have submitted a verification report since 2022 may not be required to submit another, but they can be selected for inspection. 
  • Annual assessment: Producers are responsible for confirming each year whether they continue to fall below the applicable threshold. 

All battery producers remain subject to inspection regardless of size, and RPRA may conduct a more detailed review if issues or exceptions are identified.  

Hazardous and Special Products Producers

Producers of certain hazardous and special products must submit supply data verification reports under Ontario’s updated HSP Verification and Audit Procedure. 

Key points include: 

  • Category A materials: Oil filters and non-refillable pressurized containers. 
  • Category B materials: Oil containers, antifreeze, solvents, paints and coatings, and pesticides. 
  • Large producers: Large producers of Category A and Category B materials were required to submit a supply data verification report for the 2026 reporting cycle. 
  • Updated procedure: Ontario revised the HSP Verification and Audit Procedure in May 2026 to reflect amendments to the regulation. 

HSP producers should review the current procedure to confirm their applicable category, producer classification, reporting requirements and deadline.

EPR Attestation Requirements in Alberta

Alberta’s EPR framework covers single-use products, packaging and paper products, as well as hazardous and special products. Producers must report the volume of designated materials they supply, while the Alberta Recycling Management Authority (ARMA) monitors compliance. 

For the supply years identified on ARMA’s producer declaration, producers must certify their reported information through a declaration and acknowledgement. 

By signing the declaration, the producer confirms that: 

  • Signing authority: The individual signing has authority to bind the producer. 
  • Producer responsibility: The producer remains responsible for its supply-reporting obligations, even when it retains a producer responsibility organization. 
  • Data accuracy: The submitted information is accurate or estimated using the best available evidence. 
  • Ongoing disclosure: The producer will update information that becomes outdated or inaccurate. 
  • Supporting records: Documentation must be retained for five years, provided to ARMA upon request and may be subject to audit. 

Although a PRO may assist with reporting, the producer remains the obligated party and is responsible for ensuring its requirements have been met.

Who Completes an EPR Verification or Attestation?

Verification and attestation both require producers to stand behind their reported supply data, but they are completed differently. A verification involves a qualified person performing prescribed procedures and documenting the resulting factual findings. An attestation is a declaration signed by an authorized representative of the producer certifying the submitted information and acknowledging the producer’s responsibility for maintaining supporting records. 

Ontario Verification

Verifier qualifications in Ontario are established through the procedure for each material program. For example, under Ontario’s battery procedure, the verifier may be an employee of the producer or an external third party, but cannot be the person who prepared the supply report. 

The verifier must hold an active professional designation in good standing, such as: 

  • Chartered Professional Accountant or Certified Public Accountant 
  • Association of Chartered Certified Accountants qualification 
  • Certified Internal Auditor 
  • Certified Professional Bookkeeper 
  • Registered Professional Accountant 

Because qualifications may differ across material programs, producers should confirm the requirements in the procedure applicable to their products.

Alberta Attestation 

Alberta’s declaration must be completed by an authorized signatory who has the authority to bind the producer. The signatory certifies the producer’s reported information and acknowledges that supporting documentation must be retained for five years and may be requested or audited by ARMA. 

Unlike verification, the attestation does not involve a qualified verifier performing prescribed procedures. Responsibility remains with the producer, including when a PRO assists with preparing or submitting the supply information. 

What Should Producers Have in Place?

Whether preparing for an Ontario verification, an Alberta attestation or a regulatory inspection, producers should be able to trace their reported totals back to reliable source data. 

Before filing, producers should: 

  • Confirm the obligated producer: Identify the legal entity responsible for each brand, product and jurisdiction, including any supply reported by or on behalf of another organization. 
  • Classify products consistently: Document which products and materials are obligated, how they are categorized and why any products are excluded. 
  • Document the methodology: Record how supply quantities and weights are calculated, including the source systems, assumptions, conversion factors and adjustments used. 
  • Retain supporting evidence: Maintain the sales records, product specifications, bills of materials, calculation files and PRO information needed to substantiate the report. 
  • Reconcile the final totals: Compare the report with its underlying records and investigate unexplained differences before submission. 

The exact records required will depend on the applicable EPR program, but the reporting process should be clear enough that another reviewer can follow the calculation from the source data to the final submitted total. 

Prepare the Data Before the Verification Begins

Ontario and Alberta take different approaches to reviewing EPR supply data, but both place responsibility on producers to support the information they submit. For organizations operating across multiple provinces, a consistent and traceable reporting process can make it easier to meet current requirements and adapt as EPR programs evolve.